1. Freon refrigeration systems
2. Ammonia refrigeration systems
3. Hydrocarbon refrigeration systems
4. Condensation of other refrigerations or materials
The SPL series Closed Circuit Counter Flow Evaporative Condenser is equipped with: water distribution system, snake-shaped condensing coils, drift eliminator, water collection basin at the bottom. Outside the basin there is a circulating water pump, an electronic de-scaling, and an axial fan at the top of the condensing coil. When working, the cooling water is pumpied to the nozzled above the condensing coil, forming a very thin water film. After the axial fan leads the air, the air enters into the equipment from the lower side of the equipment. It enhanced air flow and the formation of negative pressure in the case, promote to lower water evaporation temperature and water film evaporation, strengthen the heat release of the condensation coil. the high-temperature refrigerant gas enters from the upper of coils, and becames liquid flows out from the lower of coils after cooled by the outside water.
The water is evaporated which removes the heat. Parts of it became the moist air is drawn also by the fan and is discharged to the atmosphere. the remaining water falls to the sump at the bottom of the condenser where it is recirculated by the pump through the water distribution system and back down over the coils.
