Air Cooler
Air cooler uses the ambient air as the cooling medium, relying on the finned tube to expand the heat transfer area and strengthen the heat transfer outside the tube, the running fans make the air temperature rise after the air flow through the finned tube bundle to take away the heat load of the medium inside the tube, to achieve the purpose of condensing and cooling the medum inside the tube. The Air Cooler is widely used in chemical industry, metrochemical, Oil refining, Power stations, waste inceneration power plants and steel mills.
Induced type Air Cooler
The bundle of tubes is located in the air inlet side of the fan. The fan can form a good protection to the finned tube to reduce the influence of sunlight, wind, sand, rain, snow and so on, so that the air-cooled appliance has stable heat transfer performance.At the same time, it can evenly distribute the air with less heat circulation and low noise.
Forced type Air Cooler
The tube bundle is located in the air outlet side of the fan. It is suitable for high temperature process medum, easy to clean and repair, maintenance with low energy consumption.
Air-Cooled Condenser
The refrigerant vapor enters from the inlet pipe and is distributed to each serpentine pipe. It gradually cools in the pipe, and the liquid flows down for gravity, and finally discharged from the liquid collection pipe. The cooling medium (air) is forced to flow through the finned tube by the fan and the condensation heat is emited into the ambient air.
1. Low cost to run without water
2. Easy to install and operate, without any supporting equipment
3. Eco-friendly
4. Especial suitable for water deficient area
Application:
1. Refrigeration industry, cold storage engineering
2. Agriculture, food, hotel, chemical industry
3. Supporting central air-conditioning main equipment